Skip to main content

Resin Infusion Products

 

The technique of vacuum drawing resin into a dry fiber laminate in a one-sided mold is known as resin infusion. Over the top, a rigid or flexible film membrane is applied and sealed around the mold periphery. Resin infusion is categorized as a "Closed Mold Process."

The advantages of resin infusion over non-vacuum bag curing of composite laminates include:

  • Better fiber to Resin ratio
  • Stronger laminate
  • Low void content
  • Reduce operator exposure to harmful emissions
  • Reduce resin usage due to pre-compacted fabric
  • Faster Ply lay-up

Airtech range offers a one-stop shop for vacuum bagging materials needed for resin infusion of parts and tooling, including:

  • Peel Plies
  • Perforated Release Films
  • Resin Distribution Mesh
  • Vacuum Bagging Film
  • Vacuum Sealant Tapes
  • Vacuum Manifolds
  • Resin Feeds
  • Spray Adhesives
  • Vacuum Reservoirs
  • Through Bag Connectors

Resin Infusion is a process by which a vacuum draws resin into a dry fiber laminate in a one-sided mold. A rigid or flexible film membrane is placed over the top and sealed around the mold periphery. Resin infusion is considered a “Closed Mold Process”.

The benefits of resin infusion when compared to non-vacuum bag curing of composite laminates include: better fiber to resin ratio, stronger laminate, low void content, lower chance of operator being exposed to harmful emissions, reduced resin usage due to pre-compacted fabric, and faster ply lay-up.

Airtech offers a wide range of high-quality resin infusion products, including: tackifiers, flow media, flow lines, infusion connectors, semi-permeable membranes, infusion resins, and unique solutions to reduce waste and increase cycles times when infusing. Airtech also features a Resin Infusion Starter Kit with all the needed items to start infusing today!

Resin Infusion
NameDescription
Infusion & Spiral Plug Inexpensive vacuum bag plug connectors for resin infusion
Airtac 2C California compliant spray contact adhesive for temporary bonding
Flowlease Resin Infusion Combotech mesh / release film
Flowstrip 39 & Flowstrip 39MAX Resin flow channel for infusion processes
Toolfusion® 1A/ 1B High temperature tooling infusion resin with room temperature initial cure
Toolfusion® 3A/ 3B High temperature infusion resin with low initial cure temperature
Infusioncoat® 1A/1B Non-sagging, high temperature surface coat
Carbon, carbon triaxial & fibreglass fabrics Fabrics for resin infusion and standard laminate tooling
Resinflow 60 Red extruded resin distribution medium
Resinflow 90 HT Clear high temperature resin distribution medium
Greenflow 75 High performance, low profile resin distribution medium
Knitflow 160 Drapable knitted resin distribution medium
Flowlease 75-37P16 Combined product
Flowlease 160-PP200 Combo-Tech for infusion
PP200 & PP150 Non-woven release ply for general composites
FlowPeel 160-37P16-ESG Combined product
Flowstrip PP4 Removeable resin flow channel for infusion processes
Flowstrip PP4 MAX Removeable resin flow channel for infusion processes
OF313, OF500, OF750 & OF1000 Silicone rubber omega flow lines
OF 625V Vinyl omega flow line
Dahltexx® SP-2 & Dahltexx® SP-3 Air permeable resin barrier material
Dahlpac MC79 & HT Vacuum breather strip with zero resin bleed for resin infusion
Dahlvac MB80 & RC Vacuum Hose Vacuum manifold for resin infusion
Vac-Brake Combination Vacuum manifold & Resin break
Vac-Brake Pro Combination no-bleed Vacuum manifold & Resin break
PE Tube & Spiral Tube Low temperature tubing for resin infusion
Sil-Tube & Hose Clamps High temperature silicone tubing and clamps
Nylon Tube & Spiral Tube High temperature tubing for resin infusion
Infusion Tubing Connectors & Valves Infusion tube fittings
Flowrunner PP2 Flexible resin runner for resin infusion
FlowRunner KF160 Mesh wrapped spiral resin feed
Vac-Ric LT Low temperature resin infusion connector with flat base
Vac-Ric HT High temperature resin infusion connector with flat base
RIC Resin infusion connector
RB 451 Vacuum reservoir for resin infusion
Resin line clamp Flanged locking plier
Resin infusion starter kit Starter kit for resin infusion technology
Airtac 2 Mega High tack spray adhesive for temporary bonding
Tac-Strip HT Adhesive mesh for strong hold of dry fabrics
Resin infusion process
AIRTAC2MEGA
Product Video

Select Location

Airtech International Inc

Airtech Europe Sarl

Airtech Advanced Materials UK Ltd

Airtech Asia Ltd

About

We are professional and reliable provider since we offer customers the most powerful and beautiful themes. Besides, we always catch the latest technology and adapt to follow world’s new trends to deliver the best themes to the market.

Featured Posts

Contact info

  • Address: 5700 Skylab Road,
    Huntington Beach, CA 92647
    United States

  • Phone: +1 714 899 8100

  • Email: Airtech-Global